Panasonic KX-MB2085CXW, Руководство по обслуживанию

Страница: 86 / 276

86
KX-MB2085CXW/KX-MB2090CXW
• The unit has a document in memory. See the other displayed message instructions to print out the docu-
ment. For fax memory capacity.
• If the fax preview mode is set to “ON”,
- view, print or save the received fax documents using the web browser on the computer connected via the
LAN, and then erase the unnecessary documents.
- turn the setting to “OFF”. The fax documents stored in memory will be printed automatically
• When performing scan to FTP server or scan to SMB folder, the number of scanned pages or the file size
of the scanned data has exceeded the limitation. Divide the document into sections.
• Copying has stopped due to some existing problem (Example: a lack of recording paper or a recording
paper jam). See the other displayed message instructions to continue copying.
• The inside of the unit is extremely cold and cannot be operated. Use the unit in a warmer area.
• When performing memory transmission, the document being stored exceeded the memory capacity of the
unit. Send the entire document manually.
• When making a copy, the document being stored exceeded the memory capacity of the unit. Press
[STOP] to clear the message. Divide the document into sections.
• There is something wrong with the unit’s modem. Contact our service personnel.
• The other party’s fax machine is busy or has run out of recording paper. Try again.
• Recording paper is not loaded in the manual input tray. Load paper.
• The recording paper is installed in the manual tray.
• A recording paper jam occurred. Remove the jammed paper.
• If the PC fax setting is set to “ALWAYS”,
- check the connection between the computer and the unit.
- check that the computer is turned ON.
• There is no space to store new items in the phonebook. Erase unnecessary items.
• The unit is warming up. Wait for a while.
• The other party’s fax machine does not offer the polling function. Check with the other party.
• The other party’s fax machine is busy or has run out of recording paper. Try again.
• The document is jammed. Remove the jammed document.
• Attempted to send or copy a document longer than 600 mm using the automatic document feeder. Press
[STOP] to remove the document. Divide the document into two or more sheets and try again.
• The ADF top cover is not fully closed. Push firmly on the front and rear edges of the ADF top cover, and
then feed the document again.
• The recording paper is installed in the manual input tray when trying to receive faxes or print reports.
Remove the recording paper from manual input tray.
• The memory is full of received documents due to a lack of recording paper or a recording paper jam. Load
paper or remove the jammed paper.
• If the PC fax is set to “ALWAYS”,
- check the connection between the computer and the unit.
- check that the computer is turned ON.
• If your unit is connected to the computer via the LAN and the fax preview mode is set to “ON”,
- view, print or save the received fax documents, and then erase the unnecessary documents.
- turn the setting to “OFF”. The fax documents stored in memory will be printed automatically.
• After the unit has been in power save mode for up to 5 minutes, the unit will enter sleep mode. Press a key
to standby the unit for the next process.
Note:
• The unit may not enter sleep mode when beeping for alert or displaying an error message.
Display Cause & Solution