manualshive.com logo in svg

Panasonic KX-HTS Series, Руководство пользователя

Поделиться
Скачать
Panasonic KX-HTS Series Скачать руководство пользователя страница 3

Introduction

Introduction

This Manual is designed to serve as an overall technical reference for the 

Panasonic

 

KX-HTS824

and

KX-HTS32

 IP-PBXs.  It provides instructions for installing the hardware, and programming the PBX using Web

Based programming. 

The Structure of this Manual

This manual contains the following sections:

Section 1 Safety Precautions

Provides important information intended to prevent personal injury and property damage.

Section 2 System Outline

Provides general information on the PBX, including the system capacity and specifications.

Section 3 Installation

Describes the procedures to install the PBX. Detailed instructions for planning the installation site, optional
service cards, and cabling of peripheral equipment are provided.

Section 4 Confirming Connections

Making and receiving calls with extensions and trunks

Section 5 Maintenance

Maintenance procedures

Section 6 Troubleshooting

Provides information on the PBX and telephone troubleshooting.

Section 7 Appendix

Provides information about System Prompt Languages and the revision history.

About the Other Manuals

In addition to this Manual, the following manuals are available:
Programming Item List (PI)

Provides step-by-step instructions for performing system programming using a PC.

Feature Manual (FM)

Describes all basic, optional and programmable features of the PBX.

About the software version of your PBX

The contents of this manual apply to PBXs with a certain software version, as indicated on the cover of this
manual. To confirm the software version of your PBX, see "Maintenance-Version Information" 
in the Programming Item List.

Trademarks

・

 Microsoft is a registered trademark or trademark of  Microsoft Corporation in the United States

    and/or other countries.

・

 All other trademarks identified herein are the property of their respective owners.

・

 Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.

Содержание KX-HTS Series




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды