Registering the
backup battery
This procedure is not required for
devices that were included as part of
a bundle.
Register each of your backup batteries
to the hub if you want to receive
notifications in the event of a power
outage.
You can register each device by using
the registration buttons or the
[Home
Network]
app.
Using registration buttons
1
Hub:
Press and hold
M
OTHER
DEVICE
N
until the LED indicator
blinks slowly in green.
2
Backup battery:
Press and hold
M
N
until the
LED indicator blinks slowly in
green (page 10).
R
When registration is complete,
the hub sounds one long beep.
Note:
R
To cancel without registering the
backup battery, press
M
N
on the
hub and on the backup battery again.
R
If registration fails, the hub sounds
several short beeps.
Using the app
When you register the backup battery
by using the
[Home Network]
app, you
can assign a name to the backup
battery and turn its power outage
notification feature on and off. For more
information, refer to the User’s Guide
(page 15).
14
For assistance, visit www.panasonic.ca/english/support
Setup
HNP100C_(en_en)_0729_ver.030.pdf 14
2015/07/29 14:11:25
