Setup overview
1
Initial setup
Make sure you can access the
system using your mobile device.
For details, refer to the System
Setup Guide included with your
hub.
2
Insert the battery
The battery will supply power to
the connected device in the event
of a power outage.
3
Connections
Connect the backup battery to the
power outlet and to the device it
will supply power to.
4
Registration
Register each of your backup
batteries to the hub if you want to
receive notifications in the event of
a power outage. Note that this
step is not required if the backup
battery was purchased as part of a
bundle.
Inserting the battery
R
USE ONLY the specified battery.
R
Wipe the battery ends (
,
) with
a dry cloth.
R
Avoid touching the battery ends (
,
) or the unit contacts.
3
4
1
2
1
Press the notch (
A
) on the battery
cover firmly.
2
Slide it in the direction of the arrow
(
B
).
3
Insert the battery (
C
).
4
Close the battery cover (
D
).
For assistance, visit www.panasonic.ca/english/support
11
Setup
HNP100C_(en_en)_0729_ver.030.pdf 11
2015/07/29 14:11:25
