Part names and
functions
E
D
B
A
C
F
LED unit
Ambient light sensor
Infrared sensor
M
N
Used when registering the unit to
the hub.
Safety wire
Mounting stand
Confirming the status
You can use the LED to confirm the
unit’s status.
Indicator
Status
Off
No power, no
motion detected,
or unit is
disabled
*1
Lit
Motion detected
Blinking slowly
Registration mode
Blinking
Communication
error, or the unit is
out of range of the
hub
*1 You can configure the unit so that its
LED does not light when motion is
detected. For more information,
refer to the User’s Guide
(page 20).
Setup overview
1
Initial setup
Make sure you can access the
system using your mobile device.
For details, refer to the System
Setup Guide included with your hub.
2
Registration
Required only if the unit was
purchased separately (i.e., not as
part of a bundle).
3
Confirm the installation area
Read the information in this
document to confirm that the desired
installation area is suitable to proper
operation.
4
Installation
Install the unit in the desired location.
12
For assistance, please visit http://shop.panasonic.com/support
Setup
