*4 The preset melodies in this product (
“
Tone 3
”
-
“
Melody 10
”
) are used with permission of
© 2012 Copyrights Vision Inc.
*5 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*6 The flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*7 Generally, the line mode setting should not be changed. This setting automatically maintains
receiver volume at the proper level depending on the current telephone line condition. Set
the line mode to
“
A
”
if telephone line condition is not good.
Handset alarm
An alarm sounds at the set time for 3 minutes
once or daily. The alarm can be set for each
handset.
Important:
R
Make sure the unit’s date and time setting
is correct. The time setting of the system is
configured with the date and time of the
mobile device registered to the hub. If a
mobile device is not registered to the hub,
register it to the hub by following the
instructions in the System Setup Guide of
the hub.
1
M
MENU
N#720
2
MbN
: Select the desired alarm option.
a
M
SELECT
N
“
Off
”
Turns the alarm off. Go to step 7.
“
Once
”
The alarm sounds once at the set time.
“
Daily
”
The alarm sounds daily at the set time.
Go to step 4.
3
Enter the desired month and date.
a
M
OK
N
4
Set the desired time.
5
*
: Select
“
AM
”
or
“
PM
”
.
a
M
OK
N
6
MbN
: Select the desired alarm tone.
a
M
SAVE
N
R
We recommend selecting a different
ringer tone from the one used for
outside calls.
7
M
SELECT
N
a
M
OFF
N
Note:
R
To stop the handset alarm, press
M
OFF
N
or
place the handset on the charger.
R
When the handset is in use, the handset
alarm will not sound until the handset is in
standby mode.
Night mode
Night mode allows you to select a period of
time during which the handset will not ring for
outside calls. This feature is useful for time
periods when you do not want to be disturbed,
for example, while sleeping. Night mode can
be set for each unit.
Using the phonebook’s group feature
(page 20), you can also select groups of
callers whose calls override night mode and
ring the handset (Caller ID subscribers only).
Important:
R
Make sure the unit’s date and time setting
is correct. The time setting of the system is
configured with the date and time of the
mobile device registered to the hub. If a
mobile device is not registered to the hub,
register it to the hub by following the
instructions in the System Setup Guide of
the hub.
R
If you have set the handset alarm, the
alarm sounds even if the night mode is
turned on.
Turning night mode on/off
1
M
MENU
N#238
28
For assistance, visit www.panasonic.ca/english/support
Programming
HNH100C_(en_en)_0130_ver.202.pdf 28
2017/01/30 16:12:23
