Panasonic KX-HNC600C, Руководство по установке

Страница: 21 / 64

5
Attach the safety wire to the wall.
R Place the ring of the safety wire ( A )
on the wall.
R Place the washer ( B ) on top of the
ring of the safety wire.
R Tighten the screw ( C ) for the safety
wire on top of the washer.
1
2
3
Note:
R Attach the safety wire while it is bent.
R Attach the safety wire high on the wall
so that the camera does not strike
anyone in the event the camera
detaches from the wall.
R Do not hang from the camera or stand.
6
Connect the DC cable to the AC adaptor.
R Pull the DC cable indoors, and connect
the DC cable plug (
A ) to the AC
adaptor plug ( B ).
R Connect the AC adaptor ( C ) to the
power outlet.
1
Outdoors
2
Indoors
3
2
1
1 2
Note:
R Use only the supplied Panasonic AC
adaptor PNLV236.
R Be sure to connect the DC cable plug
and AC adaptor plug indoors.
Note about power connections
AC adaptor connection
R The AC adaptor must remain connected at
all times. (It is normal for the adaptor to feel
warm during use.)
R The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight of
the adaptor may cause it to become
disconnected.
Power failure
R The camera will not work during a power
failure.
For assistance, visit www.panasonic.ca/english/support 21
Setup
HNC600C_(en_en)_0113_ver.201.pdf 21 2017/01/13 11:54:14