37
5HVHWFRQ¿JXUDWLRQ
If you have forgotten the Admin PIN code, the only way to reset it to default is to
do a hard factory reset. This is the same as the Factory reset in the system menu
(
(
MENU
)
>
SYSTEM
>
FACTORY RESET
).
L
This erases all settings including account information and contacts!
Ö
Disconnect the power supply cable. Note that this is the same as the network cable
if the phone uses Power over Ethernet.
Ö
Press and hold the
(MENU)
button while you connect the cable again (i.e. starts
the KX-HDV800). Hold the button pressed until the SYSTEM RECOVERY menu is
shown on the display.
L
You can press any other button than
1
,
2
, or
3
to start the phone without resetting.
Ö
Press
1
to select
5HVHWFRQ¿JXUDWLRQ
DQGFRQ¿UPZLWK
OK
.
Ö
Upgrade to the latest version of the software when the phone has started and redo
the setup of account and other settings (see page 11).
5HVWRUH¿UPZDUH
This replaces the current software with the one supplied with the phone. All settings are
erased.
Ö
Disconnect the power supply cable. Note that this is the same as the network cable
if the phone uses Power over Ethernet.
Ö
Press and hold the
(
MENU
)
button while you connect the cable again (i.e. starts
the KX-HDV800. Hold the button pressed until the SYSTEM RECOVERY menu is
shown on the display.
L
You can press any other button than
1
,
2
, or
3
to start the phone without restoring
WKH¿UPZDUH
Ö
Press
3
to select
5HVWRUH¿UPZDUH
DQGFRQ¿UPZLWK
OK
.
$OOFRQWHQWLQWKHSKRQH¶VPHPRU\LVHUDVHGDQGWKH¿UPZDUHVXSSOLHGZLWKWKHSKRQHLV
written to the memory.
Ö
Upgrade to the latest version of the software when the phone has started and redo
the setup of account and other settings (see page 11).
HARD SYSTEM RECOVERY