10
OBTAINING A NETWORK ADDRESS
Connecting to a network with DHCP
See “Check IP address” under “USING THE WEB INTERFACE” on page 8.
Connecting to a network with static IP addresses
You need the IP address, host name, domain,
(MENU)
, gateway, DNS 1, and DNS 2.
The host name can be set freely. The domain and secondary DNS can be left blank.
Ö
Press (
MENU
) and select
SETTINGS
>
ADVANCED
(6,2).
Ö
Enter the PIN code.
L
The default code is
12345678
.
Ö
Select
NETWORK
(2)
Ö
Select
STATIC IP
.
Ö
Enter values for the IP ADDRESS.
L
Enter three digits (begin with 0 if necessary), press
OK
, enter three digits, and
so on.
Ö
Enter HOST NAME
Default is KX-HDV800.
Ö
Enter DOMAIN
Ö
Enter NETMASK
Ö
Enter GATEWAY
Ö
Enter DNS 1
Ö
Enter DNS 2
The display shows DONE.
LOGIN
See “Login” under “USING THE WEB INTERFACE” on page 8.
INSTALLATION