Panasonic KX-FPG372 Скачать руководство пользователя страница 97

Страница: 97 / 132

Frequently Asked Questions

For Fax Advantage assistance, call 1-800-435-7329.

While having an intercom call, the intercom
call stops and the unit starts to ring.

Someone is calling you from outside.
Press

{

TALK

}

{

SP-PHONE

}

{

DIGITAL

SP-PHONE

}

to answer the outside call.

Cordless handset

The handset does not work.

Make sure that the battery is installed
correctly (page 107).

Charge the battery fully (page 21).

Clean the charge contacts and charge again
(page 21).

The handset does not ring.

The ringer volume is set to off. Adjust it
(page 29).

The display shows the following and an
alarm tone sounds when I press

{

TALK

}

{

CLEAR

}

{

HOLD

}

{

INTERCOM

}

{

FLASH

}

{

CALL WAIT/PLAYBACK

}

No link to base
Place on cradle
and try again.

The handset is too far from the base unit.
Move closer and try again.

Place the handset on the base unit and try
again.

The power cord is disconnected. Plug in the
power cord.

Static, sound cuts in/out, fades. Interference
from other electrical units.

Locate the handset and the base unit away
from other electrical appliances.

Move closer to the base unit.

Press

{<}

on the handset to select a clearer

channel.

Raise the base unit antenna.

The handset stops working while being used.

Place the handset on the base unit, and
disconnect the power cord to reset the unit.
Connect the power cord, and try again.

I cannot store a name and telephone number
in the navigator directory.

You cannot store a name and number while
the unit is in the talk or intercom mode.

Do not pause for over 60 seconds while
storing.

While storing a name and telephone number
in the navigator directory, the handset starts
to ring.

To answer a call, press

{

TALK

}

{

SP-

PHONE

}

. The program will be canceled.

Store the name and number again.

I cannot redial by pressing

{

REDIAL

}

If the last number dialed was more than 32
digits long, the number will not be redialed.

The handset beeps intermittently and/or the
following is displayed.

Recharge

234

Charge the battery fully (page 21).

I charged the battery fully, but the following
is still displayed:

Recharge

234

Clean the charge contacts and charge again
(page 21).

It is time to replace the battery (page 107).

I cannot receive documents by pressing

on the handset.

You must set the remote fax activation to on
(feature #41, page 90) beforehand.

Press

#9 firmly. A single beep will be

heard.

The memory is full of received documents
due to a lack of recording paper or a
recording paper jam. Install paper or clear the
jammed paper.

The handset display is blank.

Charge the battery fully (page 21).

The handset display exits the Caller ID List
while viewing the caller information.

Do not pause for over 60 seconds while
searching.

Содержание KX-FPG372





































































































































Результаты поиска

Содержание KX-FPG372

Отзывы:

Похожие инструкции для KX-FPG372

Бренды по названию

Популярные бренды

Panasonic KX-FPG372, Руководство по эксплуатации

Результаты поиска

Содержание KX-FPG372

Отзывы:

Похожие инструкции для KX-FPG372

Бренды по названию

Популярные бренды