Panasonic KX-FPG176 Скачать руководство пользователя страница 80

Страница: 80 / 100

Operations

For fax advantage assistance, call 1-800-435-7329.

The unit beeps.

●

Recording paper or ink film has run out.
Press

{

to stop the beeps and

install paper/ink film.

Whenever I try to retrieve my voice mail
messages, the retrieval is interrupted by
the fax tone.

●

You are probably entering

98 or

to retrieve your messages.

9 is the

default setting for the fax activation code.
If you use a voice mail service, set the fax
activation feature to off or reprogram the
activation code (feature #41 on page 72).

The speakerphone is not working.

●

Use the speakerphone in a quiet room.

●

If you have difficulty hearing the other party,
adjust the volume using

The

—“

button does

not function.

●

The handset is too far from the base unit.

●

The handset is engaged in an outside call.

While having an intercom call, a series of
tones are heard.

●

Someone is calling you from outside.
Press

answer the outside call. The intercom call
will be terminated.

Cordless handset

The handset does not work.

●

Make sure that the battery is installed
correctly (p. 85).

●

Charge the battery fully (p. 20).

●

Clean the charge contacts and charge
again (p. 20).

The handset does not ring.

●

The ringer volume is set to off. Press

in step 4 on page 21.

The display shows the following and an
alarm tone sounds when I press

ÀÃ

●

The handset is too far from the base unit.
Move closer and try again.

●

Lay the handset on the base unit and try
again.

●

The power cord is disconnected. Plug in
the power cord.

Static, sound cuts in/out, fades.
Interference from other electrical units.

●

Locate the handset and the base unit
away from other electrical appliances.

●

Move closer to the base unit.

●

Press

to select a clear channel.

●

Raise the base unit antennas.

The handset stops working while being
used.

●

Place the handset on the base unit, and
disconnect the power cord to reset the
unit. Connect the power cord, and try
again.

I cannot store a name and telephone
number in the directory.

●

You cannot store a name and number
while the unit is in the talk or intercom
mode.

●

Do not pause for over 60 seconds while
storing.

While storing a name and telephone
number in the directory, the handset starts
to ring.

●

To answer a call, press

. The

program will be canceled. Store the name
and number again.

I cannot redial by pressing

●

If the last number dialed was more than 32
digits long, the number will not be
redialed.

link

base.

Place

cradle

and

try

again.

(continued)

General (cont.)

Содержание KX-FPG176





































































































Результаты поиска

Содержание KX-FPG176

Отзывы:

Похожие инструкции для KX-FPG176

Бренды по названию

Популярные бренды

Panasonic KX-FPG176, Руководство по эксплуатации

Результаты поиска

Содержание KX-FPG176

Отзывы:

Похожие инструкции для KX-FPG176

Бренды по названию

Популярные бренды