51
F
a
x
/C
o
p
y
The unit is able to scan and store documents into memory, and then transmit the stored documents.
The memory capacity is approx. 25 pages based on the CCITT No. 1 test chart in standard resolution. For the
CCITT No. 1 test chart, see page 97.
START/COPY/SET
Dial keypad
MENU
/
1
Press
.
Display:
2
Press
, then
.
3
Press
.
4
Press
or
to select “ON”.
●
If this feature is not required, select “OFF”.
5
Press
.
6
Press
.
MENU
SETUP ITEM [ ]
START/COPY/SET
MODE=ON
▼ ▲
MODE=OFF
▼ ▲
START/COPY/SET
SEND BY MEMORY
1
5
1.SYSTEM SET UP
MENU
From memory
Setting memory transmission
FACE DOWN
STOP
START/COPY/SET
Dial keypad
JOG DIAL
One-Touch
Dial keys
1
Insert the document FACE DOWN.
2
Enter the fax number using the dial keypad,
One-Touch Dial or
.
3
When using the dial keypad or
, press
.
●
The document will be fed into the unit and
scanned into memory.
After storing all of the pages, the unit will transmit
the documents.
●
The amount of memory used will be shown as a
percentage on the display.
Display:
Amount of memory used
PAGES=01
05
START/COPY/SET
JOG DIAL
JOG DIAL
Transmitting documents from memory
Note:
●
The stored documents will be automatically erased after transmission.
●
To cancel the memory transmission, press
during or after scanning the document.
●
If you select the fine, super fine or half tone resolution, the number of documents that can be sent will decrease.
●
If the stored pages exceed the memory capacity, the transmission will be canceled.
STOP
Sending Faxes