1. Introduction and Installation
11
L
Make sure the blue gear (
2
) and white gear (
3
)
are installed as shown.
5
Turn the blue gear (
4
) in the direction of the arrow
until the ink film is tight (
5
) and at least one layer of
ink film is wrapped around the blue core (
6
).
6
Close the back cover securely by pushing down on
the dotted area at both ends (
7
).
7
Close the front cover securely.
3
2
4
5
Correct
Incorrect
6
Tight
1 turn
No ink film is wrapped around the blue core.
Slack/Crease
Reverse
7
FP205-215AL-PFQX2516ZA-en.book Page 11 Thursday, July 13, 2006 9:31 AM