8. Programmable Features
42
Setting the memory
reception alert
{#}{
4
}{
4
}
To alert you with a beeping sound when a received fax document
is stored into memory due to some existing problem.
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
ON
”
(default): You will hear a beeping sound.
Note:
L
The slow beeps will continue until you clear the printing
problem and make sure the unit is supplied with enough paper
to print the stored document.
Setting friendly
reception
{#}{
4
}{
6
}
To receive a fax automatically when you answer a call and hear a
fax calling tone (slow beep).
{
0
}
“
OFF
”
: You have to press
{
FAX START
}
for fax reception.
{
1
}
“
ON
”
(default): You do not have to press
{
FAX START
}
for fax
reception.
Setting the voice
guidance (KX-FP215
only)
{#}{
4
}{
7
}
If you wish to hear voice guidance, activate this feature.
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
ON
”
(default): You will hear the friendly reception voice guide,
pre-recorded messages and voice time/day stamp.
Setting the auto
disconnection (KX-
FP215 only)
{#}{
4
}{
9
}
To answer a call with an extension telephone in TAM/FAX mode
(page 27), activate this feature and program the code.
{
0
}
“
OFF
”
{
1
}
“
ON
”
(default)
1.
{
MENU
}
i
{#}{
4
}{
9
}
2.
Press
{
1
}
to select
“
ON
”
.
i
{
SET
}
3.
Enter your code from 2 to 4 digits, using 0–9 and
{*}
.
L
The default code is
“
;
0
”
.
4.
{
SET
}
i
{
MENU
}
Changing the recording
time for your TAM/FAX
greeting message (KX-
FP215 only)
{#}{
5
}{
4
}
{
1
}
“
16s
”
(default): Maximum recording time is 16 seconds.
{
2
}
“
60s
”
: Maximum recording time is 60 seconds.
See page 34 for details.
Setting the scan
contrast
{#}{
5
}{
8
}
To send or copy a document with faint or dark writing, set this
feature before transmission or copying.
{
1
}
“
NORMAL
”
(default): Used for normal writing.
{
2
}
“
LIGHT
”
: Used for dark writing.
{
3
}
“
DARKER
”
: Used for faint writing.
Setting the incoming
message monitor (KX-
FP215 only)
{#}{
6
}{
7
}
To hear an incoming message (ICM) from the speaker when the
answering machine is recording the message.
{
0
}
“
OFF
”
{
1
}
“
ON
”
(default)
Setting the Error
Correction Mode (ECM)
{#}{
6
}{
8
}
This feature is available when the transmitting/receiving fax
machines are ECM compatible.
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
ON
”
(default): If there is an error during fax
transmission/reception, the fax machine will support the
communication.
Note:
L
You cannot change the setting when received documents are
in memory.
Feature
Feature code
Selection
FP205-215AL-PFQX2516ZA-en.book Page 42 Thursday, July 13, 2006 9:31 AM
