1. Introduction and Installation
13
L
Make sure the blue gear (
1
) and white
gear (
4
) are installed as shown.
5
Turn the blue gear (
1
) in the direction of the
arrow until the ink film is tight (
2
).
L
Make sure that the ink film is wrapped
around the blue core (
3
) at least once.
6
Close the back cover securely by pushing
down on the notched area at both ends (
1
).
7
Close the front cover securely.
3
4
1
2
1
2
Correct
Tight
1 turn
Slack/Crease
Reverse
Incorrect
The ink film is not wrapped around the
blue core.
3
1
FP141-145AL.book Page 13 Tuesday, October 21, 2003 11:07 AM