Panasonic KX-FM106, Руководство по эксплуатации

Страница: 76 / 148

76
Receiving Faxes
Extension telephone !
If you connect an extension telephone to your unit or to the same line, you can receive fax documents using
the extension telephone.
You do not have to press
(START/SET/COPY)
on the unit.
Important:
≥
Use a touch tone telephone as the extension telephone and enter the fax activation code firmly.
1 When the extension telephone rings, lift the
handset of the extension telephone.
2 When:
—document reception is required,
—a fax calling tone (slow beep) is heard, or
—no sound is heard,
press
($) (9)
(pre-selected fax activation code)
firmly.
3 Hang up the handset.
≥
The unit will start reception.
Fax activation code !
The fax activation code is required in the following cases;
—to receive faxes using an extension telephone (see above).
—to receive a voice message and fax document in the same call (p. 69).
Important:
≥
This code should be different from the remote activation ID (p. 69) and the auto disconnection code (p. 79).
1 Press
(MENU)
.
Display:
2 Press
(#)
, then
(4) (1)
.
3 Press
(START/SET/COPY)
.
4 Press or to select “ON”.
●
If this feature is not required, select “OFF”.
5 Press
(START/SET/COPY)
.
≥
The display will show the pre-selected code.
6 Enter the new code.
●
This code can be from 2 to 4 digits in length using
0 – 9, and
£
.
7 Press
(START/SET/COPY)
.
8 Press
(MENU)
.
SETUP ITEM [ ]
CODE=
¢
9
MODE=ON
▼▲
FAX ACTIVATION
1.SYSTEM SET UP
Note:
≥
You can change the fax activation code (see
below).
Note:
≥
If you subscribe to any special telephone
company services which require a code, all or
part of the fax activation code must be
different from the service access code.
≥
The fax activation code should not be set to
“0000”.
To the EXT jack or
the same line
Extension telephone
1 2 3
4 5 6
7 8 9
0
/
START/SET/COPY
MENU