Panasonic KX-FLM663HX, Руководство по эксплуатации

Страница: 71 / 92

11. Help
71
11.3.6 Network (KX-FLM673, LAN connection only)
I cannot make calls.
L
The dialling mode setting may be wrong. Change the setting (feature #120
on page 18).
The unit does not ring.
L
The ringer volume is turned OFF. Adjust it (page 20).
The other party complains
they only hear a fax tone and
cannot talk.
L
FAX ONLY mode is set (page 42). Tell the other party the number is only
used for faxes.
The
{
Redial
}
or
{
Pause
}
button does not function
properly.
L
If this button is pressed during dialling, a pause will be inserted. If pressed
immediately after a dial tone is obtained, the last number dialled will be
redialled.
I cannot receive a fax
document on the computer.
L
Make sure the following features are set beforehand.
–
PC fax reception (feature #442 on page 55)
– Computer setting for the PC fax reception (feature #443 on page 23)
Problem Cause & Solution
I cannot operate the following
functions.
– PC printing
– Scanning
– Remote Control
– PC FAX
– Device Monitor
L
The IP address of the unit may have changed.
To detect the IP address, proceed as follows.
[
Start
]
i
[
All Programs
]
or
[
Programs
]
i
[
Panasonic
]
i
the
unit’s name i
[
IP Address Checker
]
L
The IP address for the unit will be detected.
Note:
L
If the IP address cannot be detected, enter it manually (feature #501 on
page 58). The IP address of the computer and the unit must be in the
same local IP address class as shown below. Set the IP address in the
range of the number specified in the class corresponding to your local
network scale.
Class Subnet mask IP address
Class A 255.0.0.0 10.0.0.1 -
10.255.255.254
Class B 255.255.0.0 172.xx.0.1 -
172.xx.255.254
*1
Class C 255.255.255.0 192.168.xx.1 -
192.168.xx.254
*2
*1 “xx” should be the same value for the unit and for the computer, as
shown in the following example.
Example: 172.16.0.1 - 172.16.255.254
(The available range of “xx” is 16 - 31)
*2 “xx” should be the same value for the unit and for the computer, as
shown in the following example.
Example: 192.168.0.1 - 192.168.0.254
(The available range of “xx” is 0 - 255)
L
Your firewall software is blocking the connection. Disable the firewall
software or change the firewall settings to make the Multi-Function Station
work properly.
L
LAN features can be used when the unit and the computer are connected in
same network segment only. Make sure the network is configured correctly.
Consult your network administrator.
Problem Cause & Solution