Panasonic KX-FLM663HX, Руководство по эксплуатации

Страница: 58 / 92

9. Programmable Features
58
9.7 LAN features (KX-FLM673 only)
Feature/Code Selection
LAN setting with a DHCP
server
{#}{
5
}{
0
}{
0
}
{
0
}
“
DISABLED
” : Deactivates this feature.
{
1
}
“
ENABLED
” (default): The following will be allocated automatically using a
DHCP (Dynamic Host Configuration Protocol) server.
–
IP address
– Subnet mask
– Default gateway
Setting the IP address for the
LAN connection
{#}{
5
}{
0
}{
1
}
This feature is available when feature #500 is deactivated.
1.
{
Menu
}
i
{#}{
5
}{
0
}{
1
}
i
{
Set
}
2. Enter the IP address of the unit on the LAN using the dial keypad. i
{
Set
}
i
{
Menu
}
Setting the Subnet mask for
the LAN connection
{#}{
5
}{
0
}{
2
}
This feature is available when feature #500 is deactivated.
1.
{
Menu
}
i
{#}{
5
}{
0
}{
2
}
i
{
Set
}
2. Enter the subnet mask of the network on the LAN using the dial keypad. i
{
Set
}
i
{
Menu
}
Setting the default gateway
for the LAN connection
{#}{
5
}{
0
}{
3
}
This feature is available when feature #500 is deactivated.
1.
{
Menu
}
i
{#}{
5
}{
0
}{
3
}
i
{
Set
}
2. Enter the default gateway of the network on the LAN using the dial keypad.
i
{
Set
}
i
{
Menu
}
Setting the primary DNS
server for the LAN
connection
{#}{
5
}{
0
}{
4
}
This feature is available when feature #500 is deactivated.
1.
{
Menu
}
i
{#}{
5
}{
0
}{
4
}
i
{
Set
}
2. Enter the primary DNS server of the network on the LAN using the dial
keypad.
i
{
Set
}
i
{
Menu
}
Setting the secondary DNS
server for the LAN
connection
{#}{
5
}{
0
}{
5
}
This feature is available when feature #500 is deactivated.
1.
{
Menu
}
i
{#}{
5
}{
0
}{
5
}
i
{
Set
}
2. Enter the secondary DNS server of the network on the LAN using the dial
keypad.
i
{
Set
}
i
{
Menu
}
Setting the machine name
{#}{
5
}{
0
}{
7
}
1.
{
Menu
}
i
{#}{
5
}{
0
}{
7
}
i
{
Set
}
2. Enter the name of the unit to recognize on the LAN, up to 15 characters (see
page 61 for character entry).
i
{
Set
}
i
{
Menu
}
Note:
L
In order to recognize the unit on the LAN, the default name of the unit is
assigned automatically. If you change the name, assign an unique name to
avoid overlapping.
Displaying the MAC address
of the unit
{#}{
5
}{
0
}{
8
}
1.
{
Menu
}
i
{#}{
5
}{
0
}{
8
}
i
{
Set
}
2. The MAC address of the unit will be displayed.
i
{
Menu
}
IP filtering for the LAN
connection
{#}{
5
}{
3
}{
2
}
{
0
}
“
DISABLED
” (default): Deactivates this feature.
{
1
}
“
ENABLED
” : The unit will deny/approve access from the pre-programmed
IP patterns. Whether to deny or approve, and up to 4 patterns can be
programmed through the web browser interface (page 49).
Setting the IP address
automatically for the LAN
connection
{#}{
5
}{
3
}{
3
}
This feature will be displayed only when feature #500 is activated.
{
0
}
“
DISABLED
” (default): Deactivates this feature.
{
1
}
“
ENABLED
” : IP address will be allocated automatically without using a
DHCP (Dynamic Host Configuration Protocol) server.