8. Programmable Features
62
Sending a fax at a specific
time
{#}{
4
}{
1
}{
2
}
This feature allows you to take advantage of low-cost calling hours
offered by your telephone company. This feature can be set up to 24
hours in advance of the desired time.
{
0
}
“
OFF
”
(default)
{
1
}
“
ON
”
To send a document:
1.
If the
{
FAX
}
light is OFF, turn it ON by pressing
{
FAX
}
.
2.
Insert the document into the auto document feeder.
3.
If necessary, change to the desired resolution (page 28) and the
desired contrast (page 28).
4.
Press
{
MENU
}
.
5.
Press
{#}
, then
{
4
}{
1
}{
2
}
.
6.
Press
{
1
}
to select
“
ON
”
.
7.
Press
{
SET
}
.
8.
Enter the fax number.
L
To enter an item using one-touch dial feature and navigator
directory, see step 4 on page 33. (When using navigator
directory, you do not have to press
{
DIRECTORY
}
before
pressing
{V}
or
{^}
.)
9.
Press
{
SET
}
.
10.
Enter the transmission start time.
L
Press
{*}
repeatedly to select
“
AM
”
or
“
PM
”
.
11.
Press
{
SET
}
.
L
The document will be fed into the unit and scanned into
memory. The unit will then send the data at the specified time.
Note:
L
To cancel after programming, press
{
STOP
}
then
{
SET
}
.
L
You can also send a document using the scanner glass. Press
{
SET
}
in step 11, then press
{
START
}
.
Setting the Error
Correction Mode (ECM)
{#}{
4
}{
1
}{
3
}
This feature is available when the sending / receiving fax machines are
ECM compatible.
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
ON
”
(default): If there is an error during fax transmission /
reception, the unit will support the communication.
Setting the connecting
tone
{#}{
4
}{
1
}{
6
}
If you often have trouble when sending faxes, this feature allows you to
hear connecting tones: fax tone, ring back tone and busy tone. You
can use these tones to confirm the status of the other party’s machine.
{
0
}
“
OFF
”
: Deactivates this feature.
{
1
}
“
ON
”
(default): You will hear connecting tones.
Note:
L
If the ring back tone continues, the other party’s machine may not
be a fax machine or may have run out of paper. Check with the
other party.
L
The connecting tone volume cannot be adjusted.
Activating the Distinctive
Ring feature
{#}{
4
}{
3
}{
0
}
{
0
}
“
OFF
”
(default)
{
1
}
“
ON
”
See page 42 for details.
Feature/Code
Selection
FLB811-PFQX2307ZB-en.book Page 62 Thursday, February 16, 2006 3:57 PM
