9. Programmable Features
53
9.3 Advanced features
See page 51 for how to enter advanced feature
programming.
Code #22: Setting the journal report to print
automatically
AUTO JOURNAL
=ON
[
±
]
“
ON
”
(default): The unit will print a journal report
automatically after every 30 new fax
transmissions and receptions (page 34).
“
OFF
”
: The unit will not print a journal report, but
will keep a record of the last 30 fax transmissions
and receptions.
Code #23: Sending documents overseas
OVERSEAS MODE
=ERROR
[
±
]
If you cannot send a fax overseas even if the
number is correct and the line is connected,
activate this feature before sending the fax.
This feature improves the reliability by reducing
the transmission speed.
“
ERROR
”
(default): When the previous fax
transmission fails and you wish to re-send the
document.
“
NEXT FAX
”
: This setting is effective only for the
next attempted fax transmission. After
transmission, the unit will return to the previous
setting.
“
OFF
”
: Deactivates this feature.
Note:
L
This feature is not available for broadcast
transmission.
L
Calling charges may be higher than usual.
Code #25: Sending a fax at a specific time
DELAYED SEND
=OFF
[
±
]
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
1.
Insert the document.
2.
If necessary, press
{A}
or
{B}
repeatedly to
select the desired resolution (page 34).
3.
Press
{
MENU
}
.
4.
Press
{#}
then
{
2
}{
5
}
.
5.
Press
{A}
or
{B}
repeatedly to select
“
ON
”
.
6.
Press
{
SET
}
.
7.
Enter the fax number.
8.
Press
{
SET
}
.
9.
Enter the transmission start time.
L
If you select 12-hour time entry when you
set the date and time (page 19), press
{*}
repeatedly to select
“
AM
”
or
“
PM
”
.
L
If you selected 24-hour time entry when
you set the date and time (page 19), the
time is set using 24-hour time entry.
10.
Press
{
SET
}
.
11.
Press
{
MENU
}
.
Note:
L
To cancel after programming, press
{
STOP
}
then
{
SET
}
.
Code #26: Setting the Caller ID list to print
automatically
AUTO CALL. LIST
=OFF
[
±
]
“
ON
”
: The Caller ID list will be printed
automatically each time the unit logs 30 different
callers (page 29).
“
OFF
”
(default): The Caller ID list will not be
printed, but the unit will keep a record of the
information for the last 30 different callers.
Code #31: Activating the Distinctive Ring
feature
DISTINCTIVE RING
=OFF
[
±
]
See page 43 for details.
Code #32: Setting the ring pattern for fax
(Distinctive Ring feature)
FAX RING PATTERN
RING=B–D
[
±
]
See page 44 for details.
Code #36: Receiving oversized documents
RCV REDUCTION
=ON
[
±
]
To slightly reduce the received fax image when
printing, so that the received document will be
approximately the same length as the original
document.
“
ON
”
(default): The received fax image will be
printed slightly smaller than the original image.
“
OFF
”
: Deactivates this feature. The received
fax image will be printed at the same size as the
original image.
Note:
L
An slight margin will be added to the printed
documents, and therefore if this feature is
FC971CX-PFQX2269ZA-en.book Page 53 Friday, August 5, 2005 8:29 AM
