Panasonic KW8M, Руководство пользователя

Страница: 35 / 87

KW8M Eco-POWER METER
26
4.2.4 MODE4
(Mode for setting of each parameter for optional function)
Auto-off setting mode OFF
Display LED turns off automatically when there is no key operation for a long time.
・
Off time can be set the range of 0 to 99min.
“0” should be set if you want to turn always light on.
“1 to 99” should be set if you want to turn light off at setting time.
・
After turns off the backlight, any key operation makes it turns on.
・
After turns off the backlight, one decimal point at the right end is blinking.
Log cycle setting mode LOG *Only AKW8111H
Mode defines save cycle for selected logging.
・
Select from 1/5/10/15/30/60.
・
When you’d like to save log data every 1 minute, select “1”.
*This setting is log save cycle to read out by some software (Selected logging).
In order to check the log data in the memory, software is required. The recommended software “KW
Monitor” is available to download from our website in free of charge.
*Only hourly log data can be checked with the display of Eco-POWER METER.
As for the save cycle of log data (automatic log) displayed in the main unit, it is fixed 60 minute without
relations for above setting for 60 minutes.
Initialize memory of main unit S.FMT *Only AKW8111H
Use to initialize memory of main unit.
・
Select OFF and press <SET>, it doesn’t initialize.
・
Select ON and press <SET>, it initialize memory of main unit.
*Initialize memory of main unit when start using the unit or when it continues power off or no battery.
When it is not initialized, it may not display log data correctly.
Decimal point (Right end)