Installation and Relocation
Do not position the unit in a location where
it is unstable.
To prevent fire or shock hazard, do not
expose this unit to rain or any type of
moisture.
Do not place the unit in a hot humid or
dusty environment.
Prolonged exposure to these adverse
conditions may cause fire or electric
shock.
Do not block the air vents. Doing so can
cause heat to build up, and may result in
fire.
When moving the unit, be sure to unplug
the power cord from the AC outlet. If the
unit is moved with the power cord
attached, it can cause damage to the cord
which could result in fire or electric shock.
Do not use the hopper hanging out of a
table.
When carrying the unit, do not use the
hopper as handles.
Move this unit with two persons, and hold
it by both side grips. Dropping the unit can
cause injury and damage to the unit.
Operating Safeguards
If the unit falls down or gets damaged, turn
the unit off, and unplug the power cord.
Otherwise, it may cause fire or electric
shock.
Do not place any liquids or heavy items on
the unit.
Accidental spillage of liquid into the unit
may cause severe damage. If this occurs,
turn the unit off, unplug the power cord,
and contact your dealer for service.
Do not touch the image sensor covers or
their surroundings immediately after
continuous scanning.
This area is very hot and can cause burns.
When wiping the rollers (A) and
lower-section image sensor cover, make
sure to close the straight path tray.
Notched section
A
Image sensor
cover
Straight path tray
If the straight path tray is open, touching
the notched section can cause injury.
Be careful not to pinch your fingers when
closing the front door. It can cause injury.
10
Operating Manual
Before You Start
