manualshive.com logo in svg

Panasonic KV-S1025C SERIES, Руководство по обслуживанию, Страница: 26 / 117

Поделиться
Скачать
Panasonic KV-S1025C SERIES Скачать руководство пользователя страница 26

26

7.3.

Replacing Limited Life Parts 

7.3.1.

Paper Feed Roller

    (1) Turn off the scanner by turning the Power Switch off and
         unplugging the AC Adaptor from the scanner. (See 7.2.1.)

    (2) Remove the Feed Tray. (See 7.2.1.)

    (3) Push the Door Open Button to open the ADF Door. 
         (See 7.2.1.)

    (4) After opening the Paper Feed Roller Cover, remove the
         Paper Feed Roller.

    (5) Take out a new Paper Feed Roller from the Roller
         Exchange Kit (KV-SS030).

    (6) Install the new Paper Feed Roller with its gear facing to the
         left (seen from the back), and close the Paper Feed Roller
         Cover.

         Note: 

      Make sure to close the Paper Feed Roller Cover
      tightly, by pressing both ends of the cover.

    (7) Close the ADF Door slowly until it clicks into place.
         (See 7.2.3.)

    (8) After installing the Feed Tray, turn on the scanner by
         plugging the AC Adaptor to the scanner and turning the
         Power Switch on. (See 4.2 and 4.3.)  

    (9) Execute “

Clear Counter

” for replacing the Paper Feed

         Roller with Service Utility. (See 9.3.4.)

Содержание KV-S1025C SERIES






















































































































Отзывы:

Нет отзывов