26
Rev.1.0
Trouble shooting
Before asking for repairs, check the symptoms with the following table.
Contact a dealer if the suggested remedies do not correct the problem or if the problem is
not described below.
Symptom
Cause/solution
The power cannot be turned on.
•
Is the battery charger connected to the
microphone (with no battery)?
>> Connect the charger to the microphone.
Is microphone charging?
(CHG indication RED or RED brink)
>>Please extract a charge cable.
•
Is the battery depleted?
>>
Charge the battery.
Does not use
(at the time of Power ON,CHG LED is RED)
Pairing registration with a receiver has not been
performed.
>>
(1)
Press a receiver's [LINK] button, and a receiver is
made into register mode.
(2)
Press simultaneousl
y [PWR/MUTE] button and [INT/E1]
b
utton will register for receiver.
( microphone power OFF
state)
Volume too low
(No sound)
Is the volume of the [OWN] microphone
turned down?
>> With the [OWN] selection indicator lit, press the
volume button to increase the volume.
Is the receiver set up correctly?
>> Check the settings.
No sound from the microphone opening
Is any external device connected to the external
input terminal or microphone input terminal?
>> Connection of an external device or external
microphone, even if not powered up, disables sound
transmission from the microphone opening of the
microphone.
Unplug the connected devices
No sound
Does the [OWN] selection indicator blink?
>> Press the [PWR/MUTE] button to cancel muting.
