25
Rev.1.0
Replacing the neck strap
• When replacing the neck strap, turn off the power of the microphone, and make sure that
the microphone is not connected to the charger.
Remove the screw from the microphone.
1 The screw of a pendant microphone is removed
with a driver.
2 Remove the other side of the neck strap in the
same way.
When attaching a neck strap to the
microphone, hook each side of the
strap to each claw, and reverse the
above procedure.
After the neck strap is attached to the microphone,
make sure both sides of neck strap are hooked to
the claws.
Important:
• Use only the neck strap that is intended for this microphone.
(This neck strap is provided with a safety closure to prevent strangling.)
Otherwise, that may result in accidental injury.
