background image

                                                               

 

 

iii 

 

Important Safeguards and Warnings  

1

Electrical safety 

All installation and operation here should conform to your local electrical safety codes.  
The product must be grounded to reduce the risk of electric shock. 
We assume no liability or responsibility for all the fires or electrical shock caused by improper 
handling or installation.  

2

Transportation security 

Heavy stress, violent vibration or water splash are not allowed during transportation, storage and 
installation. 

3

Installation 

Keep upwards. Handle with care.  
Do not apply power to the NVR before completing installation.  
Do not place objects on the NVR 

4

Qualified engineers needed  

All the examination and repair work should be done by the qualified service engineers.   
We are not liable for any problems caused by unauthorized modifications or attempted repair. 

5

Environment 

The NVR should be installed in a cool, dry place away from direct sunlight, inflammable, 
explosive substances and etc. 
This series product shall be transported, storage and used in the specified environments. 
 

6.  Accessories 

Be sure to use all the accessories recommended by manufacturer. 
Before installation, please open the package and check all the components are included. 
 

7. Lithium battery  

Improper battery use may result in fire, explosion, or personal injury!  
When replace the battery, please make sure you are using the same model! 

 
Before your operation please read the following instructions carefully.  

 

Installation environment 

  Keep away from extreme hot places and sources

  

  Avoid direct sunlight

 

  Keep away from extreme humid places

 

  Avoid violent vibration

 

  Do not put other devices on the top of the NVR

 

  Be installed in well ventilated place; do not block the vent. 

Содержание k-nl304k





















Отзывы: