Panasonic k-nl304k, Быстрый старт

Страница: 14 / 20

10

Holiday: It is to set holiday setup. Please note you need to go to the General interface
(Main Menu->SETTING->SYSTEM->GENERAL) to add holiday first. Otherwise you can
not see this item.

Pre-record: System can pre-record the video before the event occurs into the file. The
value ranges from 1 to 30 seconds depending on the bit stream.

Redundancy: System supports redundancy backup function. It allows you backup
recorded file in two disks. You can highlight Redundancy button to activate this function.
Please note, before enable this function, please set at least one HDD as redundant.
(Main menu->SETTING->STORAGE->HDD MANAGER).
Please note this function is
null if there is only one HDD.

ANR: It is to save video to the SD card of the network camera in case the network
connection fails. The value ranges from 0s
～
43200s. After the network connection
resumed, the system can get the video from the SD card and there is no risk of record loss.

Period setup: Click button after one date or a holiday, you can see an interface shown
as in Figure 3-10.There are four record types: regular, motion detection (MD), Alarm,
MD & alarm. Please following the steps listed below to draw the period manually.
a) Select a channel you want to set. See Figure 3-6.
Figure 3-6
b) Set record type. See Figure 3-7.
Figure 3-7
c) Please draw manually to set record period. There are six periods in one day.
See Figure 3-8.
Figure 3-8