18
English
Initial Setup
When the TV is turned on for the first time, it will
automatically search for available TV channels and give
options to set up the TV.
≥
These steps are not necessary if the setup has been
completed by your local dealer.
≥
Please complete connections (p. 11 - 13) and settings
(if necessary) of the connected equipment before
starting Initial Setup. For information about the
settings for the connected equipment, read the
manual of the equipment.
1
Plug the TV into a live mains socket
and turn the power on
≥
Takes a few seconds to be displayed.
2
Select the following items
Set up each item by following the on-screen instructions.
Example:
∫
How to use the remote control
Select the language
Register (pair) the Bluetooth
®
remote control
≥
Press and hold the volume down button and the
Google Assistant (voice control) button simultaneously
for 3 seconds.
Set up your Wi-Fi network and Google account
≥
If you are using an Android phone for setup, select
[Continue]. You can then easily transfer your Android
phone’s Wi-Fi network and Google account to your
TV.
≥
If you are not using an Android phone for setup, select
[Skip], then complete settings on the setup screen
which appears next.
≥
When using an Ethernet cable to connect to the
internet, select [Skip], then select [Use Ethernet] on
the Wi-Fi network settings screen.
Select your country
Enter the PIN number for parental controls
Enter your postcode
Select [Scan]
≥
If you use an RF selector, switch it to the digital TV
signal before starting the scanning. As soon as the
digital TV scan is finished, switch it to the analogue TV
signal to tune analogue channels. Even if some
channels are not tuned correctly, you can try to tune
them by [Channel Scan] (Settings > Channel >
Channels).
Select [Home]
Select [Home] for use in a home viewing environment.
≥
[Shop] is for shop display.
≥
To change the viewing environment later on, the set
will need to have all settings initialised by accessing
[Reset].
If tuning has failed check the RF cable, and the network
connection, and then follow the on-screen instructions.
≥
The TV goes into Standby mode when no signal is
received and no operation is performed for 10 minutes
if [No Signal Power Off] in the Power menu is set to
[10 Minutes] (factory setting).
≥
To retune all channels
[Channel Scan] (Settings > Channel > Channels)
≥
To initialise all settings
[Reset] (Settings > Device Preferences > About)
Move the cursor
Access the item / store the setting
Return to the previous item (if available)
Select TV mode
Home
Shop
“Home” mode is optimized for efficient energy usage for home use.
“Shop” mode is optimized to store demo with fixed settings.
Initial Setup is now complete and the
TV is ready for viewing.
Malaysia
Singapore
Thailand
Indonesia
Note
TH-40_50_58_65JX700GKST_Eng_8A06B00034100.book 18 ページ ２０２１年２月１９日 金曜日 午後４時５３分
