Setup
23
NOTE:
•
The Easy Install installs the KX-CL510 printer
description file, USB printer class driver, ColorSync
profile and Status Display.
If you want to install the additional software “KX-Printer
Network Setup Tool”, select Custom Install to complete
the installation.
•
The Status Display folder is created in the (Macintosh
HD:Panasonic:KX-CL510) folder after finishing
installation successfully.
If you install the “KX-Printer Network Setup Tool” using
the Custom Install, its folder is also created in the same
folder.
Step 2: Installing the Adobe PostScript
printer driver
1
Insert the
KX-CL510 CD-ROM
disk in your CD-ROM
drive, and then double-click the
KX-CL510
icon, the
Mac OS
folder and the
English
folder.
2
Double-click the
AdobePS Installer
icon in
accordance with the Macintosh OS version.
- AdobePS 8.7.2 Installer: Mac OS 8.6 / 9.0 / 9.1 / 9.2
- AdobePS 8.6 Installer: Mac OS 8.1 / 8.5
The
Adobe PostScript Driver
window is displayed.
3
Click
[Continue...]
.
The
License
window is displayed.
4
Click
[Accept]
to proceed this installation.
The
AdobePS Installer
window is displayed.
5
Click
[Install]
.
The installation starts.
The “Installation was successful” will be displayed
after finishing installation.
6
Follow the instruction on the screen to complete the
installation.
NOTE:
•
For best results any job sent to the printer should be
sent using the Adobe driver and the KX-CL510 PPD.
Provide the installer to all users who send jobs.
For Mac OS X 10.1 - Mac OS X 10.2
Step 1: Installing the KX-CL510 PPD
(PostScript Printer Description) file
and ColorSync profile
1
Insert the
KX-CL510 CD-ROM
disk in your CD-ROM
drive, and then double-click the
KX-CL510
icon,
Mac OS X
,
English
folder.
2
Double click the
KX-CL510Install
icon.
3
Follow the instructions to complete the installation.
NOTE:
•
If you want to print Classic application documents, you
are required to install the KX-CL510 software for Mac
OS 9.2, then set the computer and printer. Refer to “For
Mac OS 8.1-Mac OS 9.2” in this section.
Set the computer (and printer) depending on the interface:
network
(see below) or
USB
(see page 25).
■
When using the Network Interface Cable
The following are the steps to set up network printing
using AppleTalk and TCP/IP.
Step 1: Setting up AppleTalk and TCP/IP on the computer
Step 2: Setting up TCP/IP on the printer
Step 3: Setting the PostScript printer driver
Step 1: Setting up AppleTalk and TCP/IP on
the computer
If the AppleTalk and TCP/IP of your computer are already
set, proceed to the next step. If they are not set, consult
with your network administrator. Regarding the
configuration of TCP/IP, refer to the help menu or
documentation for Macintosh.
NOTE:
•
Refer to “Network” section in the Operating Instructions
about setting the AppleTalk and TCP/IP to your
Macintosh.
Setting the Computer (and Printer)
Set
u
p
