Panasonic i-Shaper ER-GD40, Руководство по эксплуатации

Страница: 12 / 40

12
English
Removing and mounting the blade
Removing the blade
Hold the trimmer and push the
blade with your thumb.
Mounting the blade
Fit the mounting hook (
B
) into the blade mounting (
A
) on the
trimmer and then push in until you hear a click.


Troubleshooting
Perform the following actions.
If the problems still cannot be solved, contact the store where
you purchased the unit or a service center authorized by
Panasonic for repair.
Problem Action
The trimmer has become
blunt.
Operating time is short.
Trimmer stopped
functioning.
Until problems are solved, please
follow each procedure as follows;
1. Charge the trimmer.
(See page 8.)
2. Clean the blade and apply oil.
(See page 11.)
3. Replace the blade.
(See this page.)
4. Have the battery replaced by
an authorized service center.
Charge the battery for
approximately 8 hours
continuously to rejuvenate it.
If few uses remain even after
charging, the battery has reached
the end of its life. (Fluid may be
leaking due to degradation at the
end of battery life.)
Contact an authorized service
center for repair.
The trimmer cannot be
charged.
Insert the appliance plug into the
trimmer firmly.
Makes a loud sound.
Apply oil. (See page 11.)
Confirm that the blade is properly
attached.
ER-GD60_40_ME.indb 12 3/9/2017 1:22:36 PM