![background image](http://html.mh-extra.com/html/panasonic/i-pro-wv-sfn130pj/i-pro-wv-sfn130pj_operating-instructions-manual_277518137.webp)
[SSL]
Select “On” if you want to use SSL encryption when sending E-mail notifications for alarm occurrences or the
“Diag.” function. When you select “On”, the authentication method will be set to “SMTP”. Set the user name
and the password used for authentication.
•
Default:
Off
Note
•
Some SMTP servers may not support SSL.
•
SSL supports SMTP over SSL, but STARTTLS is not supported.
•
When “On” is selected, the SMTP port number may need to be set to 465. Ask your Internet service
provider for the appropriate settings.
[Address 1] - [Address 4]
Enter the destination E-mail address. Up to 4 destination E-mail addresses can be registered.
•
[Alarm] checkbox:
When the checkbox is selected, the E-mail notification will be performed upon an alarm
occurrence.
•
[Diag.] checkbox:
When the checkbox is selected, the E-mail notification will be provided in the following
cases.
–
When notification of the remaining capacity of the SD memory card has been provided
–
When the SD memory card has become full
–
When the SD memory card cannot be recognized
•
[Destination E-mail address]:
Enter the destination E-mail address.
–
Available number of characters:
3 - 128 characters
–
Available characters:
Alphanumeric characters, the at sign (@), the period (.), the underscore (_),
and the hyphen (-).
To delete the registered address, click the [Delete] button respective to the desired address.
[E-mail subject]
Enter the E-mail subject.
•
Available number of characters:
0 - 50 characters
[E-mail body]
Enter the E-mail body.
•
Available number of characters:
0 - 200 characters
Note
•
Notification E-mail will be sent with the message “The capacity of the SD memory card is full.” when
the SD memory card has become full, or “The SD memory card cannot be detected.” when mounting
of the SD memory card failed.
•
Entering alternative text into the E-mail body automatically adds the event or time when an alarm
occurs.
Alternative text alarm event: %p%, occurrence time: %t%
(Examples of use)
After setting the following characters in the E-mail body, there is a VMD alarm occurrence at the time
19:13:24.
E-mail body settings: %p% alarm occurred at %t%.
Sent E-mail body: "A "VMD" alarm occurred at 19:13:24."
Operating Instructions
137
16 Configuring the network settings [Network]
Содержание i-Pro WV-SFN130PJ
Страница 83: ...Operating Instructions 83 11 Configure the settings relating to images and audio Image Audio ...
Страница 161: ...8 Click Next 9 Click Finish Operating Instructions 161 16 Configuring the network settings Network ...
Страница 200: ...C0316 6042 PGQP2210TA i PRO Co Ltd 2022 i PRO Co Ltd https www i pro com ...