Panasonic HYBRID IP-PBX KX-TDA200, Руководство по функциям

Страница: 43 / 464

1.1.3.3 Call Waiting
Description
Used to inform a busy extension that another incoming call is waiting. The busy extension user can answer
the second call by disconnecting the current call or placing it on hold. This feature is also known as Busy Station
Signalling (BSS).
The following notification method can be assigned for each extension depending on the call waiting and the
telephone type:
a.
Call Waiting Tone: Tone from the handset or built-in speaker
b.
OHCA: Voice from the built-in speaker
c.
Whisper OHCA: Voice from the handset
d.
Off: No notification.
Call Type
Notification Method
DPT IP-PT Other Telephone
Intercom Call Call Waiting tone/OH-
CA/Whisper OHCA/Off Call Waiting tone/Whis-
per OHCA/Off Call Waiting tone/Off
Trunk Call
*1
Call Waiting tone/Off
*1 Including a doorphone call, call via an incoming call distribution group, and a trunk call transferred from another extension.
Conditions
•
Automatic Call Waiting
Through system programming, it is possible to select whether a call waiting tone is automatically sent to
the extension when receiving trunk calls, doorphone calls, external sensor calls and hold-recall calls.
Through system programming, it is also possible to select whether extensions will receive Automatic Call
Waiting from intercom calls.
•
Call Waiting call for an extension in a VM group (DPT/DTMF) is not available.
•
Data Line Security
Setting Data Line Security cancels the Call Waiting setting. (
®
1.11.5 Data Line Security)
•
Call Waiting Tone
A PT user can hear different Call Waiting tones for trunk call and intercom call if "
Tone 2
" has been selected
through personal programming (Call Waiting Tone Type Selection). If "
Tone 1
" has been selected, the
same Call Waiting tone will be heard for both trunk call and intercom call.
All Call Waiting tone patterns have a default (
®
3.3.1 Tones/Ring Tones).
•
Caller Information
With the Call Waiting tone, the caller’s information flashes on the display for five seconds, followed by a
10-second pause, then flashes again for five seconds.
•
Call Waiting from the Telephone Company
Besides the Call Waiting service within the PBX, the Call Waiting tone offered by an analogue line from
the telephone company informs the extension user of another incoming trunk call that is waiting. He can
answer the second call by disconnecting the current call or placing it on hold using EFA. For details, consult
your telephone company.
Call Waiting Caller ID (Visual Caller ID):
When using the call waiting tone supplied by the telephone company over analogue lines, the waiting
caller’s telephone number can be received. The number will flash on the display for five seconds, followed
by a 10-second pause, then flash again for five seconds.
Note that the received caller information will not be displayed on telephones or wireless phones connected
to SLT ports.
Feature Guide 43
1.1.3 Incoming Call Indication Features