Panasonic HL-C1-WL Series, Руководство пользователя

Страница: 29 / 36

CHAPTER 5 SPECIFICATIONS
5-2
5-2 Controller
Model No. HL-C1C-WL HL-C1C-M-WL
1 Supply voltage 24V DC 10%, incl. ripple 0.5V (P-P)
2
Current
consumption With 2 sensor heads: 550mA approx.
With 1 sensor head: 430mA approx.
3 Sampling period 100 S,144 S, 200 S, 255 S, 332 S, 498 S, 1000 S
4 Serial input/output RS-232C
5
Temperature
characteristic
0.01% F.S. /
℃
Voltage
Output voltage: -5 to +5V / F.S
Output range: -10.9 to +10.9mV
Max. 2mA, output impedance 50
Ω
6
An
al
og o
u
tp
ut
Current
( 1)
Current output: 4 to 20mA / F.S
Output range: 0 to 29.5mA
(Up to 25mA with max. load impedance)
Load impedance 250
Ω
max.
Alarm output
N channel open drain
･
Max. sink current: 100mA
･
Applied voltage: 30VDC or less
(Between alarm output and 0V)
･
ON resistance: 5
Ω
or less
Photo MOS
･
Max. load current: 50mA
･
Applied voltage: 30VDC or less
(Between alarm output and COM)
･
ON resistance: 35
Ω
or less
･
Operation time: Max.2ms
Output
operation
Open upon excessive or insufficient light amount
7
Short-circuit
protection
Incorporated
Judgment output
(O1, O2)
N channel open drain
･
Max. sink current: 100mA
･
Applied voltage: 30VDC or less
(Between judgment output and 0V)
･
ON resistance: 5
Ω
or less
Photo MOS
･
Max. load current: 50mA
･
Applied voltage: 30VDC or less
(Between judgment output and COM)
･
ON resistance: 35
Ω
or less
･
Operation time: Max.2ms
Output
operation
Open or closed upon reach at threshold value, judgment output
selection setting (The threshold value varies according to the
hysteresis setting.)
8
Short-circuit
protection
Incorporated
9
Remote interlock
input
When open: Laser beam stop
10 Zero set ON input
Zero set is ON with short
circuiting
Input voltage: 12 to 24V DC
Max. input voltage: 30V DC
･
Zero set is ON when the
voltage is input.
11
Zero set OFF input
Zero set is OFF with short
circuiting
Input voltage: 12 to 24V DC
Max. input voltage: 30V DC
･
Zero set is OFF when the
voltage is input.