Panasonic HL-C1-WL Series, Руководство пользователя

Страница: 3 / 36

1
About This Document ( HL-C1-WL Series)
This document ( HL-C1-WL Series ) describes modifications, additions and deletions
to the HL-C1 Series . Read the USER’S MANUAL for the HL-C1 Series to check the
descriptions in this document.
Precautions for the Handling Class 3B Laser
Beam
1. IEC
A semiconductor laser is used as the light source of the sensor.
The laser class is based on IEC Standards
(IEC60825-1).
Cautions
1) Be careful not to look directly at the laser beam or at its reflection from a mirror
surface.
2) Mount the sensor at a height above or lower than eye level so the beam will
not shine directly into eyes during operation.
The safety distance (Nominal Optical Harm Distance: NOHD) is approximately
1.8m, but make sure the laser beam hits a diffusing reflector or an absorbing
body.
3) This machine is not equipped with a mechanism for stopping laser emission
automatically upon disassembly of the sensor; contact us in the case of failure.
You may be exposed to laser emission if the machine is disassembled for re-
pairs or the like.
4) Do not operate according to methods not described in this USER’S MANUAL.
Caution – You may be exposed to hazardous laser radiation if the device is
controlled or adjusted in procedures not specified in this manual.
5) Carefully read the description given on the following warning label.
The warning label is affixed to the side of the sensor. A warning label in Eng-
lish is included in the package; use it when required.
Model HL-C135C-BK10
Wave length 658nm
Pulse width Max. 1ms
Period 100 to 1000 s
Max. output 10mW
Class 3B