8
5.1.4.
USER INTERFACE (UI) status
Pressing key
is possible to switch between these configuration (rolling):
5.1.5.
Setup menu
This menu allow to set three possible oven configurations. Is possible to enter in this menu as follows:
Child lock
: The program makes it possible to set the automatic control block for the oven 1 minute after using one of the controls.
Show Room
: The program enables all the functions foreseen by the user interface but all the loads (heating elements and motors)
are always OFF.
Power configuration
: heating elements are activated always in alternated way (never two elements together)
STATUS
DISPLAY SHOWS
KEYS USE
STAND-BY
Display OFF
the uP maintains the clock updated
CLOCK
D1 shows the clock
Set the clock (see
§
3)
ON
D1 Clock - D2 OFF
Oven lamp ON
If within 20sec any coo king function
or minute minder is selected, the UI
comes back (a utomatically) to
CLOCK status.
Set the UI in available different status
Select function.
Set a minute minder (see
§
7)
Enter the “Setup menu”
STATUS
DISPLAY SHOWS
KEYS USE
ON
D1 shows the clock
D2 is OFF
Set the UI to STAND-BY status
Keep pressed for 5sec to enter in the Setup Menu
SETUP MENU
Child lock
D1 shows “ L ”
D2 shows “ OFF ”
Switch between ON-OFF condition shown on D2
Save configuration and exit from Setup Menu
Go to set the Show Room parameter
Wait for 3sec to automatically exit from Setup Menu and return to
CLOCK status
SETUP MENU
Show Room
D1 shows “ d ”
D2 shows “ OFF ”
Switch between ON-OFF condition shown on D2
Save configuration and exit from Setup Menu
Go to set the Show Power parameter
Wait for 3sec to automatically exit from Setup Menu and return to
CLOCK status
SETUP MENU
Power config
D1 shows “ HI ”
D2 shows “ PO ”
Switch between HI-LO condition shown on D1
Save configuration and exit from Setup Menu
Go to set the Show Room parameter
Wait for 3sec to automatically exit from Setup Menu and return to
CLOCK status
