16
8.2. OVEN DOOR
1. Open completely the oven door and insert the pins
provided with the appliance in the relevant holes on the
sides of the hinges.
2. (1) Hold the door firmly on both sides and tilt it to an angle
of 30* approximately, until the pin prevent any further
closing.
(2) pull the door up and out as shown in the picture
3. To reinstall the door, insert and block carefully the hinge in
its slot, open completely the door and remove the pins.
8.3. GLASS PANELS AND DOOR
HANDLE
1. INNER GLASS PANEL
Open the do or and l ock it with the spe cific pins (see
above). Hold firmly the glass on the inner / lower side and
pull it upwards until it’s released from its fasteners.
Repeat the operation on the upper / external side to
release the remaining couplings.
2. INTERMEDIATE GLASS PANELS
Lift and remove the two panels.
CAUTION
The panels are coupled only by means of soft
rubber spacers on the corners.
Make sure to take hold of both of them.