21
8.9. DOOR LOCK
1.
DOOR LOCK
Remove the 3 screws shown in the picture with a Phillips
screwdriver and disconnect the wiring.
NOTICE:
When rewiring make sure to connect the FASTON
terminals to the microswitch, and the connector to the
door lock actuator.
8.10. HEATING ELEMENTS
8.10.1. Components and connections on
the back of the oven.
1: Door-lock thermostat
2: Grill + Upper heating element
3: Safety thermal cut-out
4: Oven fan heating element
5: Oven fan motor
6: Turnspit motor
7: Lower heating element
8: Terminal board
8.10.2. GRILL+UPPER HEATING ELEMENT
Access from the back of the oven: disconnect the wiring
Access from the oven cavity: remove with a Phillips screwdriver
the two screws shown in the picture.
1. Pull the heating element toward the cavity then.
2. Lower it and pull it out.
8.10.3. OVEN FAN HEATING ELEMENT
Access from the back of the oven: disconnect the wiring
Access from the oven cavity: remove the oven fan cover,
remove the screws as shown in the picture with a Phillips
screwdriver.
