6
VQT4N33 (ENG)
∫
Detaching the Lens
≥
Check that the camera is turned off.
While pressing on the
lens release button
D
,
rotate the lens toward the
arrow until it stops and
then remove.
• Attach the lens rear cap so
that the lens contact point does not get
scratched.
• Attach the body cap to the camera so no dirt or
dust will get inside the main unit.
∫
Attaching and Detaching the Lens Cap
Pinch the lens cap as shown in the figure
to attach or detach.
≥
Be careful not to lose the
lens cap.
∫
Attaching the Lens Hood
(Supplied Accessory)
1 Align the fitting mark
E
on
the short side of the lens
hood with the mark on the
tip of the lens.
2 Turn the lens hood in the
direction of the arrow until
it stops, and align the stop
mark
F
on the long side of
the lens hood with the
mark on the tip of the lens.
Hold the lens hood with
your fingers placed as
shown in the picture.
• Do not hold the lens
hood in a way that twists
or bends it.
VQT4N33_ENG_SPA.book 6 ページ ２０１２年１２月１１日 火曜日 午前１１時５７分
