16
z
R
EMOTE
C
ONTROL
O
PERATION
ENGLISH
Programming The Remote
The Universal Remote Control can be programmed to
operate many manufacturers’ components, using the
component function buttons for VCR, DVD, AUX, RCVR,
DTV, CABLE or DBS. Follow the procedures for
programming your Remote Control with or without a code
for the component.
Note:
Determine the manufacturer of the component and look
in the table for the code.
Procedure
1.
Confirm that the external component is plugged and
operating.
2.
Turn the component off.
3.
Press and
together,
for at least 5
seconds
. After 5 seconds, the illuminated mode
(component) buttons will begin to flash. Release the OK
and POWER buttons.
4.
Press appropriate component button on the Remote
Control VCR, DVD (CD), DTV, RCVR, DBS/CBL or AUX
(PVR or VCR2). The component button will illuminate
steadily and all others will go out.
5.
Enter the 3-digit component code using the Remote
Control numeric keypad (0 ~ 9 buttons). The component
button will blink twice.
6.
Press the Remote Control
to test the component.
If the procedure was successful, the component will
turn on and the component key will blink twice and then
go out.
Note:
If the component does not operate with the Remote
Control, repeat steps 3 through 6 using another code.
(Some brands have multiple codes.) If an incorrect code
is entered, or if the procedure takes longer than 30
seconds, the programming will fail.
Programming Without A Code
This procedure searches all codes and is called the
“sequence method.”
1.
Confirm that the external component is plugged in and
on.
2.
Turn the component off.
3.
Press
and together,
for at least 5
seconds
. After 5 seconds, the illuminated mode
(component) buttons will begin to flash. Release the OK
and POWER buttons.
4.
Press appropriate component button on the Remote
Control.
5.
Press the
button to place the remote control into
the step and set mode.
6.
Point the remote control towards the component.
7.
Press
VOL
X
(the mode key will blink three times), then
press the Remote Control
to test the component.
Continue this process until the proper code is found. If
the procedure was successful, the component will
turn
on
.
Note:
Each time you press the
VOL
X
button, make sure that
the component key blinks twice before pressing the
POWER button.
8.
Once the device responds, press
to store the
code. The mode (component) button will blink twice.
Note:
It may take many attempts before the correct code
is found. If you miss a code, press
W
VOL,
then press
the
button to test the component.
Component Codes
The Universal Remote Control is capable of operating
many component brands after entering a code. Some
components may not operate because the codes are not
available due to limited memory. The Universal Remote
Control does not control all features found in each model.
Device
Operates
Default
TV
TV (Panasonic Only)
Panasonic Code
VCR
VCR (Preset)
Panasonic Code
DVD
DVD and CD (Preset)
DVD Panasonic Code
DBS/
CABLE
DBS & CBL (Preset)
Panasonic DBS Code
RCVR
Audio Receiver (Preset)
Panasonic RCVR Code
DTV
DTV (Panasonic Only)
Panasonic DTV Code
AUX
Personal Video Recorders,
Cassette and VCR2
Panasonic Personal
Video Recorder Code
OK
POWER
POWER
Write the code numbers from tables in this space.
This will serve as a reference if you need to program
your Remote Control.
VCR
DVD
DVD (CD)
DBS
RECEIVER
CABLE
AUX (PVR)
AUX (VCR2)
OK
POWER
POWER
POWER
OK
POWER
Содержание HDTV DLP PT-60DL54
Страница 36: ...34 z NOTES ENGLISH ...
Страница 37: ...NOTES 35 z ENGLISH ...
