Panasonic HDC-SDT750, Руководство по эксплуатации

Страница: 67 / 163

67
VQT3B52
Use this function to record an image with vivid colour, like an image on a movie film.
≥
Change the mode to .
≥
Switch to manual mode. ( l 83)
≥
Set [ZOOM MODE] to [Opt.Zoom 12
k
]. (
l
65)
≥ Set [REC MODE] to [HA] or [HG]. ( l 65)
≥
This function cannot be used in the intelligent auto mode or 1080/50p recording mode.
≥
The images may not appear smooth.
It is possible to continuously record motion picture to an SD card when there is no space
available in the built-in memory. (It allows you to record only to SD card from built-in
memory.)
≥
Change the mode to .
≥
Set to [Built-inMemory] in the [MEDIA SELECT].
≥ Insert an SD card.
≥
is displayed on the screen. will disappear when space in the built-in memory is
gone and the recording to the SD card starts.
≥ Relay recording can only be performed once.
≥ Combine the scenes that were relay recorded using the [RELAY SCENE COMBINE]
into the SD card. (
l 102, 112)
≥
Once you have performed [RELAY SCENE COMBINE], you can use the relay recording
function again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENE
COMBINE], a message is displayed. You will be able to perform relay recording by
touching [YES], but you will not be able to perform the [RELAY SCENE COMBINE] after
that.
≥ Still pictures are recorded to the SD card after relay recording.
≥ is displayed on the thumbnail display during the playback of the scene that was relay
recorded on the built-in memory.
[DIGITAL CINEMA]
: [RECORD SETUP] # [DIGITAL CINEMA] # [ON]
[RELAY REC]
: [RECORD SETUP]
#
[RELAY REC]
#
[ON]