Panasonic HDC-SDT750, Руководство по эксплуатации

Страница: 146 / 163

146
VQT3B52
Problem Check points
This unit cannot be
operated though it is
turned on.
This unit does not
operate normally.
≥
Remove the battery or AC adaptor, wait about
1 minute and then reconnect the battery or AC
adaptor. Then about 1 minute later, turn on the unit
again. (Conducting the above operation while the
media is being accessed may damage the data on
the media.)
≥ If normal operation is still not restored, detach the
power connected, and consult the dealer who you
purchased this unit from.
Item other than the
touched one is
selected.
≥
Calibrate the touch screen. (
l
43)
The remote control
does not function. ≥ [REMOTE CONTROL] of the [SETUP] is [OFF].
(
l 45)
≥ The button-type battery of the remote control may be
run out. Replace it with a new button-type battery.
(
l
45)
The remaining time
indication or the
elapsed time
indication is not
shown.
≥
[DISPLAY] of the [SETUP] is [OFF]. ( l 37)
The unit arbitrarily
stops recording. ≥ Use an SD card that can be used for motion picture
recording. (
l 17)
≥
The recordable time may have shortened due to the
deterioration of the data writing speed or repeated
recording and deletion. Using the unit, format the SD
card or built-in memory. (
l 42)
≥
If [AGS] is [ON], record in the normal horizontal
position or set [AGS] to [OFF]. (
l 72)
Auto focus function
does not work.
≥
Switch to intelligent auto mode.
≥ If you are trying to record a scene which is hard to
bring into focus in auto focus mode, use the manual
focus mode to adjust the focus. (
l 31, 86)