Panasonic HDC-SD9D, Руководство по эксплуатации

Страница: 90 / 128

90
VQT1N58
5
Press the MENU button to
display the PictBridge menus.
6
Select the date print setting on
[DATE PRINT].
≥ If the printer is not capable of date printing, this
setting is unavailable.
7
Select the paper size setting on
[PAPER SIZE].
[STANDARD]: Size specific to the printer
[4
k
5 INCH]: L size
[5 k 7 INCH]: 2L size
[4
k
6 INCH]: Postcard size
[A4]: A4 size
≥
You cannot set paper sizes not supported on
the printer.
8
Select the desired layout setting
on [PAGE LAYOUT].
[STANDARD]: Layout specific to the printer
[
]: No frame print
[ ]: Frame print
≥
You cannot set page layouts not supported on
the printer.
9
Select [PRINT]
#
[YES] and
press the cursor button to print
the pictures.
≥
Exit PictBridge by disconnecting the USB cable
(supplied) after the pictures have been printed.
When you stop printing halfway
Move the cursor button down.
≥ A confirmation message appears. If [YES] is
selected, the number of prints set is cancelled
and the screen returns to step 3. If [NO] is
selected, all the settings are kept and the
screen returns to step 3.
≥
Avoid the following operations during printing.
These operations disable proper printing.
j
Disconnecting the USB cable
j
Opening the SD card cover and removing
the SD card
j
Switching the mode switch
j Turn the unit off
≥ Check the settings for the paper size, print
quality etc. on the printer.
≥
The print quality varies with paper size.
≥
The edges of still pictures recorded in this unit
with a 16:9 aspect ratio may be cut off. When
using a printer with a trimming or borderless
printing function, cancel this function before
printing. (Refer to the operating instructions of
the printer for details.)
≥ When the unit is connected directly to the
printer, the DPOF settings cannot be used.
≥
Connect the printer directly to this unit. Do not
use a USB hub.
MENU
HDCSD9EP-VQT1N58_eng.book 90 ページ ２００８年１月１０日 木曜日 午後９時３６分