Panasonic HDC-HS9P, Руководство по эксплуатации

Страница: 12 / 148

12
VQT1N74
Quick Guide
∫
Charging the battery
1 Connect the AC cable to the AC adaptor
and the AC outlet.
2 Insert the battery into the battery charger
by aligning the arrows.
∫
Inserting the battery
Open the LCD monitor and install
the battery by inserting it in the
direction shown in the figure.
A Insert the battery until it clicks and locks.
∫
How to turn on the power
Turn on the power by turning the
mode dial to
, or while
pressing the lock release button A .
≥
Rotate the mode dial while at the same time
pressing in the lock release button if changing
from OFF to another mode.
≥
Status indicator B
≥
Align with the mark C .
≥
To turn off the power, set the mode dial to OFF.
∫
Inserting/removing an SD card
1 Set the mode dial to OFF.
2 Open the SD card cover while sliding the
SD CARD OPEN lever
B
.
3 Insert/remove the SD card.
≥
When inserting an SD card, face the terminal
side
C
in the direction shown in the illustration
and press it straight in as far as it will go.
≥
When removing the SD card, press the center
of the SD card and then pull it straight out.
4 Securely close the SD card cover.
≥
Securely close it until it clicks.
∫
Language selection
1) Press the MENU button, then select
[LANGUAGE] and press the cursor button.
2) Select [English] and press the cursor button.
Charging lamp
[CHARGE]
A
Lights up:
Charging
Goes off:
Charging
completed
Card access lamp [ACCESS]
≥
When this unit is processing data, the
access lamp
A lights up.
HDCHS9P-VQT1N74_ENG.book 12 ページ ２００７年１２月２５日 火曜日 午後８時４３分