Panasonic HDC-HS80PU, Руководство по обслуживанию

Страница: 20 / 50

20
6 Service Mode
1. Indication method of the service menu
Set the mode switch “Motion Picture Recording” mode.
2. While the power is turned OFF, keep pressing the “Power” button, “Zoom lever” to W side and “intelligent auto/Manual” button
for more than 3 seconds until the top screen of the Service Mode Menu being displayed.
Service mode menu
NOTE:
Do not using service mode except above table of Service mode menu.
3. End method of the top screen of the service mode menu
Touch the [ EXIT ] of LCD to end the service mode, and then POWER OFF.
Screen display Contents Function
1 Factory settings Function to throw a product up in a factory shipment state
(When recorded data in HDD, “error display” is done)
2 Drive information display Fall detection frequency of HDD, Frequency that exceeds
highest/lowest operation guarantee temperature and serial
number display
3 HDD self check execution Function to check self as for the state of HDD
4 Lock search history indication Display the camera system error cord for three histories saved
in EEPROM
5 Power ON self check result display Power ON self check (function to diagnose correct function of
the device and interface between devices) result display
6 HDD hardware test Function to confirm state of HDD hardware
10 Erasing the lock histories Erasing the error histories (working time is not erased)
11 Erasing the internal media
management information Erasing the internal media management information for fast
boot stored in IC3402(flash memory)
12 Camera data indications while the
video playback Display the camera informations (Shutter speed, Iris value,
White balance and focal length) while playing recorded video