Panasonic HDC-HS300P, Руководство по обслуживанию

Страница: 2 / 105

2
TABLE OF CONTENTS
PAGE PAGE
1 Safety Precaution ------------------------------------------------- 3
1.1. General Guidelines ----------------------------------------3
1.2. Leakage Current Cold Check ---------------------------3
1.3. Leakage Current Hot Check (See Figure 1.)--------3
1.4. How to Discharge the Capacitor on Sub PCB ------4
2 Warning -------------------------------------------------------------- 5
2.1. Prevention of Electrostatic Discharge (ESD)
to Electrostatically Sensitive (ES) Devices ----------5
2.2. How to Recycle the Lithium Ion Battery (U.S.
Only)-----------------------------------------------------------5
2.3. Caution for AC Cord (For EB/GC/SG) ----------------6
2.4. How to Replace the Lithium Battery-------------------7
3 Service Navigation ------------------------------------------------ 8
3.1. Introduction --------------------------------------------------8
3.2. General Description About Lead Free Solder
(PbF) ----------------------------------------------------------8
3.3. Important Notice 1:(Other than U.S.A. and
Canadian Market) ------------------------------------------8
3.4. How to Define the Model Suffix (NTSC or PAL
model)---------------------------------------------------------9
3.5. Precautions for Handling HDD------------------------ 10
3.6. Formatting HDD ------------------------------------------ 13
4 Specifications
----------------------------------------------------
14
5 Location of Controls and Components ------------------ 17
6 Service Mode ----------------------------------------------------- 23
6.1. Drive Information Display ------------------------------ 24
6.2. HDD Self Check Execution ---------------------------- 25
6.3. Lock Search History Indication ----------------------- 26
6.4. Power ON Self Check Result Display--------------- 27
6.5. HDD Hardware Test ------------------------------------- 28
7 Disassembly and Assembly Instructions --------------- 29
7.1. Disassembly Flow Chart-------------------------------- 29
7.2. PCB Location---------------------------------------------- 29
7.3. Disassembly Procedure -------------------------------- 30
8 Measurements and Adjustments
--------------------------
48
8.1. Electric Adjustment -------------------------------------- 48
9 Factory Setting
---------------------------------------------------
50
9.1. HOW TO TURN ON THE FACTORY
SETTINGS? ----------------------------------------------- 50
9.2. WHAT IS THE FACTORY SETTINGS? ------------ 51