5
SQT0478
≥
Do not spray insecticides or volatile
chemicals onto the unit.
≥
Before cleaning, detach the battery or pull the
AC cable from the AC outlet, and then wipe
the unit with a soft, dry cloth.
≥
If the unit is very dirty, dip a cloth in water and
squeeze firmly, and then wipe the unit with
the damp cloth. Next, dry the unit with a dry
cloth.
≥
Use of benzine, paint thinner, alcohol, or
dishwashing liquid may alter the camera body
or peel the surface finish. Do not use these
solvents.
≥
When using a chemical dust cloth, follow the
instructions that came with the cloth.
≥
When storing the unit in a cupboard or
cabinet, it is recommended that you place a
desiccant (silica gel) in with it.
≥
The battery used in this unit is a rechargeable
lithium-ion battery. It is susceptible to
humidity and temperature and the effect
increases the more the temperature rises or
falls.
≥
If the operating time is very short even after
the battery has been recharged, the battery
has worn out. Please purchase a new battery.
≥
When the card access lamp is lit, do not:
j
Remove the SD card
j
Turn the unit off
j
Insert and remove the USB cable
j
Expose the unit to vibrations or shock
∫
About the recording method
for recording motion pictures
This unit can record motion pictures using four
different recording methods, including MOV
(LPCM), MP4 (LPCM), MP4 and AVCHD
*1
.
(
l
27)
*1 AVCHD Progressive (1080/50p, 1080/
60p) supported.
MOV (LPCM)
*2
, MP4 (LPCM)
*2, 3
:
This recording method is suitable for editing
images. Audio is recorded in linear PCM.
MP4
*2, 3
:
This recording method is suitable for playback
and editing on a PC. Audio is recorded in AAC.
*2 Those methods are not compatible with
motion pictures recorded in AVCHD
format.
*3 Those methods can record motion
pictures in formats that support 4K. 4K
motion pictures offer a resolution four
times higher than that of full high-
definition motion pictures.
AVCHD:
This recording method is suitable for playback
on a high-definition TV or storage on a disc.
Audio is recorded in Dolby
®
Digital.
∫
Regarding system frequencies
The NTSC/PAL standard setting of this unit can
be switched in [SYSTEM FREQ]. (
l
26)
≥
To use this unit in regions where the TV
broadcasting system is NTSC, set it to
[59.94Hz(NTSC)]. To use this unit in regions
where the TV broadcasting system is PAL,
set it to [50Hz(PAL)]. (Playback is not
possible on TVs and other devices with a
standard that differs from the system
frequency setting of this unit.)
≥
If you record an AVCHD scene on the SD
card, it cannot be used with a different
system frequency. Use another SD card
when you change the system frequency.
∫
Indemnity about recorded
content
Panasonic does not accept any responsibility
for damages directly or indirectly due to any
type of problems that result in loss of recording
or edited content, and does not guarantee any
content if recording or editing does not work
properly. Likewise, the above also applies in a
case where any type of repair is made to the
unit.
HC-X1000E-SQT0478_mst.book 5 ページ ２０１４年９月８日 月曜日 午後７時１４分
