20
SQT0478
Inserting/removing an SD card
Caution:
Check that the access lamp has gone off.
1
Open the SD card slot cover and
insert (remove) the SD card into
(from) the card slot
B
.
≥
One SD card can be inserted into each of the
card slot 1 and the card slot 2.
≥
Face the terminal side
C
in the direction
shown in the illustration and press it straight
in as far as it will go.
≥
Press the centre of the SD card and then pull
it straight out.
2
Securely close the SD card slot
cover.
When using a non Panasonic SD card for the first time, or one which was previously used on
another equipment, it is necessary to format the SD card. (
l
25) When the SD card is formatted,
all of the recorded data is deleted. Once the data is deleted, it cannot be restored.
Access lamp
A
≥
When this unit is accessing the SD card,
the access lamp lights up.
HC-X1000E-SQT0478_mst.book 20 ページ ２０１４年９月８日 月曜日 午後７時１４分
