- 189 -
9
(When selecting [WEP]/[TKIP]/[AES])
Touch [INPUT], then enter the Password.
≥
For details on how to enter characters, refer to page
116
.
≥
When the entry is complete, touch [Enter].
≥
A message is displayed when the connection is complete. Touch [ENTER], and exit [Wireless
Settings].
≥
Check the wireless access points instruction manual and settings when a saving wireless access
point.
≥
The Encryption methods are [AES], [TKIP] and [WEP] in descending order of strength. We
recommend you connect with the strongest possible Encryption method.
≥
When the signal of the wireless access point is weak, a connection may not be established. Refer
to “Messages” (
l
238
) and “Troubleshooting” (
l
240
) for details.
≥
Transmission speed may decrease, or may not be usable depending on the environment it is
used in.
Setting up a connection manually
Setting up a direct connection to a smartphone
Check the [Direct Connection Password] setting in [Wi-Fi Setup]. (
l
195
)
≥
The default setting is [OFF].
Select [ON] as needed, for example when the setting seems necessary for your Wi-Fi
environment.
≥
When [Direct Connection Password] is set to [OFF]
j
Proceed to the following section, “When [Direct Connection Password] is set to [OFF]” in
“Using [Link to Cell] with a direct connection”. (
l
159
)
≥
When [Direct Connection Password] is set to [ON]
If your smartphone is compatible with WPS, refer to “[WPS Connection]”. If not, refer to
“Connecting with QR code”.
[HC-WXF991PP]/[HC-VX981PP]:
Enter SSID and Password or scan QR code to connect.
j
Proceed to the following [WPS Connection]
j
Proceed to the “Connecting with QR code” (
l
190
)
j
Proceed to the “Connecting by entering an SSID and Password” (
l
191
)
When the Wi-Fi connection is complete, refer to “When [Direct Connection Password] is set to [ON]”
in “Using [Link to Cell] with a direct connection”. (
l
160
)
1
Press Wi-Fi button on this unit and touch [Wi-Fi Setup].
2
Touch [Direct Connection].
3
Touch [Change connection type].
4
Touch [WPS Connection].
Confirming that the Wi-Fi connection is complete
j
The status indicator of this unit is lit green
j
is displayed on the screen
[WPS Connection]