- 169 -
Using [Baby Monitor]
≥
Proceed to Step 2 when your Wi-Fi connection has been made via [Set Wireless Access Point] in
[Wi-Fi Setup] (
to
).
1
Press Wi-Fi button on this unit.
2
Touch [Baby Monitor] on the Wi-Fi menu screen.
≥
The SSID of the wireless access point to which this unit is connected is displayed.
3
Connect the smartphone to a wireless access point.
≥
To connect it, select the SSID of the wireless access point displayed on the screen of this unit.
4
Start up the smartphone application “Image App”.
≥
When this unit is connected to the Internet via the wireless access point, the notification function,
which sends notifications from this unit to the smartphone, becomes available.
≥
When the connection to this unit is complete, the screen of this unit turns off. To turn on the
screen again, touch the screen.
To exit [Baby Monitor]:
Touch [EXIT] displayed on the screen of this unit or press the Wi-Fi button.
≥
The message is displayed. Touch [YES] to close the indication.
∫
Checking on the baby in your house
You can check the image of the baby being monitored on your smartphone.
≥
Images of baby-monitoring cannot be recorded.
≥
It cannot be confirmed with multiple smartphones simultaneously.
∫
Voice message function
The smartphone and this unit can be used like radio transceivers, allowing the users to have a
conversation by taking turns.
≥
A voice message of up to 1 minute can be sent.
≥
Open the LCD monitor of this unit when using the Voice message function.
∫
Sending notifications to your smartphone
In the following cases, this unit sends a notification to the smartphone:
≥
When baby monitoring starts
≥
When a sound is detected
∫
Sound detection
When this unit detects a sound, it can automatically send a notification to the connected
smartphone.
≥
This function can be used only if this unit is connected to the Internet via the wireless access
point when [Baby Monitor] is used.
≥
Depending on [Sound Detection Sensitivity] setting and recording conditions, sounds may not be
detected. Test the sound detection function in advance to check if sounds can be detected and
notified.
What you can do with [Baby Monitor]