- 34 -
The unit is put into recording pause approx. 1 second when the unit is turned on with the mode set
to
or .
≥
Depending on the recording conditions, start time may be longer than 1 second.
≥
In the Quick Power On Mode, the zoom magnification becomes approx. 1
k
.
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.
≥
When in Quick Start Standby Mode about 80% of the power used in recording pause mode
is being consumed, so the recording time will be reduced.
≥
/
/
Quick Start will not work if there is no SD card inserted.
≥
Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there is no
SD card inserted.
1
Select the menu.
2
Close the LCD monitor.
The status indicator
A
flashes green and the unit goes into
Quick Start Standby Mode.
≥
The lens cover does not close.
3
Open the LCD monitor.
The status indicator
A
lights red and the unit is put into
recording pause.
≥
Quick Start Standby Mode is cancelled if
j
about 5 minutes elapsed
j
mode is set to
≥
Depending on the recording conditions and menu settings, time for Quick Start may be longer
than 0.6 seconds.
≥
It may take some time for Automatic White Balance to adjust.
≥
In the Quick Start Mode, the zoom magnification becomes approx. 1
k
.
≥
When it has gone into Quick Start Standby Mode automatically with the [ECONOMY (BATT)]
(
), close the LCD monitor once and open it again.
≥
Turn the unit off using the power button.
[QUICK POWER ON]
: [SETUP]
#
[QUICK POWER ON]
#
[ON]
[QUICK START]
: [SETUP]
#
[QUICK START]
#
[ON]
MENU
HC-V720
HC-V727
HC-V710
HC-V720M
MENU
Содержание HC-V727
Страница 192: ...Panasonic Corporation Web site http panasonic net ...